Table of Contents
Advertisement
FIG.D
FIG.E
IFC17026.01
www.powercommander.com
10
Attach the ground wire from the PCFC harness to the negative side of the
battery as shown in Figure D.
11
Using the supplied velcro, secure the PCFC in the tail section as shown in
Figure E.
Make sure to clean both surfaces with the alcohol swab before attaching.
Note: Due to the lack of storage room on this motorcycle, this is the best place
to secure the PCFC. This will require removal of the stock tool kit.
12
Reinstall the air box and the fuel tank.
13
Reinstall the main seat and the passenger seat.
2007-2008 Kawasaki ZX-6R - 4
Advertisement
Table of Contents
Need help?
Do you have a question about the POWER COMMANDER FC and is the answer not in the manual?
Questions and answers