Table of Contents
Advertisement
14
Information
S e r v i c e
1.
When in the service mode the service icon will be illuminated. If a delayed regenera-
tion is initiated the service icon will blink..
2.
When setting the time of day and delayed regeneration time, be sure the clock is in
the correct 12 hour time cycle. In the PM time cycle the PM icon will be illuminated.
If it is not illuminated the clock is in the AM time cycle.
3.
When the display is in the service mode it will flash from the time of day to the re-
maining days before regeneration.
4.
The programming icon will be illuminated during programming or regeneration.
5.
The extra cycle button serves as an enter/return button when programming. The up
and down arrows allow value changes in each parameter programming mode. Once
the value is reached the extra cycle button can be pushed to save the value and
move to the next parameter.
6.
The extra cycle button also initiates immediate or delayed regenerations. Pushing
and releasing it immediately triggers a delayed regeneration (will regenerate at the
time specified under RT in the programming mode). The service icon will blink when
a delayed regeneration is initiated. Pushing and holding the extra cycle button for 5
seconds will initiate an immediate regeneration. The service icon will blink and the
valve will move to the first regeneration position and begin the process.
7.
If the error icon is illuminated there is a problem with the unit and a service technician
should be contacted.
8.
The system will hold the values for up to 48 hours after a power outage. Outages
exceeding 48 hours should have the programming values revisited. It is a good idea
to write down the programming parameters/values so they are available if a repro-
gramming is required.
NOTE:
The Flow Indicator and the x1000 Indicator will not be shown on the inFusion
display.
Visit us online at www.USWaterSystems.com
Timer Features
Parameter
Display
Error/
Icon
I c o n
P r o g r a m m i n g
I c o n
Extra Cycle
Button
US Water inFusion Water Conditioner | 169-ISF
Data
PM
Display
Indicator
D o w n
U p
B u t t o n
B u t t o n
Flow Indicator
x1000 Indicator
Give us a call at: 1-800-608-8792
Advertisement
Table of Contents
