Technical Specifications; Health, Environment And Safety; Restrictions In Guarantee; Restrictions In Use - Simrad HS52 Instruction Manual

2. TECHNICAL SPECIFICATIONS

2.1

Health, Environment and Safety

2.2

Restrictions in Guarantee

2.3

Restrictions in Use

20222360 / E
Operation or troubleshooting of HS52 equipment will not imply
any risk for high voltages, explosions or exposure to gas. The
HS52 is type-approved according to IEC 60950/EN60950
standards regarding product safety (low voltage), and IEC
60945/EN60945 standards on electromagnetic compatibility
(immunity/radiation) and vibration.
All HS52 electrical and electronic components have to be
disposed separately from the municipal waste stream via
designated collection facilities appointed by the government or
local authorities. The correct disposal and separate collection of
your old appliance will help preventing potential negative
consequences for the environment and human health. It is a
precondition for reuse and recycling of used electrical and
electronic equipment. For more detailed information about
disposal of your old appliance, please contact your local
authorities or waste disposal service.
The liability of the manufacturer is limited to repair of the HS52
only, and excludes consequential damages such as customer's
loss of profit or damage to other systems traceable back to HS52
malfunction. The warranty does not cover malfunctions of the
HS52 resulting from the following conditions:
a) The customer has opened the Sensor unit
b) Over-voltage or incorrect power connection
c) The equipment has been exposed to extreme chock and
vibrations
Simrad HS52 is designed for use on board marine surface
operated vessels with roll and pitch motions up to ±30°.
The HS52 function is based on GPS signals and requires free
sight to the sky, minimum 4 visible satellites, and PDOP value
less than 6 and otherwise normal conditions to operate.
TECHNICAL SPECIFICATIONS
5