Finalizing The Matrix - Lightware UBEX Installation And Network Setup Manual


  
6. Configuration Steps - Netgear M4300-24X24F Installation and Network Setup Guide for UBEX 31
6.5. Finalizing the Matrix
The UBEX video matrix is ready to use now.
The Lightware Device Controller software
Download the Lightware Device Controller (LDC) software from the website (www.lightware.com) to control
the matrix. Install the software to a control system (e.g. a laptop). Establish the connection between the
Matrix Management Unit (MMU) and the computer via Ethernet, USB, or RS-232 interface.
Open the LDC and find the MMU in the Device discovery list. Double click on the name of the MMU to
connect. The matrix crosspoint menu opens where you can configure the video system and see all information
about the network.
LDC crosspoint menu