Detailed Instructions; Login To The Switch; Ip Address Settings - Lightware UBEX Installation And Network Setup Manual


  
6. Configuration Steps - Netgear M4300-24X24F
6.4. Detailed Instructions
6.4.1. Login to the Switch
Open a web browser (e.g. Google Chrome) and enter the IP address of the switch. The login screen appears.
Enter the following parameters:
▪ Username: admin
▪ Password: (empty) - no password needed
Login screen of the switch
Installation and Network Setup Guide for UBEX
6.4.2. IP Address Settings
You can change the default static IP address to any other one you want.
Navigate to the System -> Management -> Management Interfaces -> IPv4 Service Port Configuration -> submenu
and check the Service Port Configuration Protocol to None. When it is done, press the Update button to save the
configuration.
Port IP address settings page
23