Table of Contents
Advertisement
6. Configuration Steps - Netgear M4300-24X24F
6.4.6. LLDP
DEFINITION: The Link Layer Discovery Protocol (LLDP) is a vendor-neutral link layer protocol in the Internet
Protocol Suite used by network devices for advertising their identity, capabilities, and neighbors on an
IEEE 802 local area network, principally wired Ethernet.
Remote Device Inventory
Navigate to the System -> LLDP -> LLDP -> Remote Device Inventory submenu. Check the connected and
explored devices by port or IP address.
Remote Device Inventory page
TIPS AND TRICKS: this table can be used for debugging purpose as well. If you are sure that a UBEX
device is connected to a port but it is not in the table, check the SFP+ transceiver modules or the fiber
optical connections or the DAC cable connections - might be the module or the cable has a contact
problem or it is faulty.
Installation and Network Setup Guide for UBEX
Remote Device Information
Clicking on the Port opens the detailed information window about the remote device.
Remote Device Information page
28
Advertisement
Table of Contents
