Port Transceiver Information - Lightware UBEX Installation And Network Setup Manual


  
5. Configuration Steps - Ubiquiti EdgeSwitch 16 XG
LLDP Remote Device Summary
Go to the Switching -> LLDP -> Remote Devices submenu.
After the UBEX endpoints and the MMU booted up you can check the presence of the devices in the LLDP
Remote Device Summary page.
LLDP Remote Device Summary page
Installation and Network Setup Guide for UBEX
5.4.6. Port Transceiver Information
You can check the connection interfaces by ports.
TIPS AND TRICKS: this table can be used for debugging purpose as well. If you are sure that an SFP+
transceiver module or fiber optical cable or DAC cable is connected to a port but it is not in the table, might
be the module or the cable has contact problem or it is faulty.
LLDP Remote Device Summary page
20