Save The Configuration; Finalizing The Matrix - Lightware UBEX Installation And Network Setup Manual

Table of Contents

Advertisement

 
5. Configuration Steps - Ubiquiti EdgeSwitch 16 XG
5.4.7. Save the Configuration
Click on the Save Configuration button on the upper right corner of the page to save the current configuration
settings.
WARNING! Always save the configuration before power off the switch otherwise the settings will be lost.
Save Configuration page
Installation and Network Setup Guide for UBEX
5.5. Finalizing the Matrix
The UBEX video matrix is ready to use now.
The Lightware Device Controller software
Download the Lightware Device Controller (LDC) software from the website (www.lightware.com) to control
the matrix. Install the software to a control system (e.g. a laptop). Establish the connection between the
Matrix Management Unit (MMU) and the computer via Ethernet, USB, or RS-232 interface.
Open the LDC and find the MMU in the Device discovery list. Double click on the name of the MMU to
connect. The matrix crosspoint menu opens where you can configure the video system and see all information
about the network.
LDC crosspoint menu
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ubex-pro20-hdmi-f100Ubex-mmu-x200

Table of Contents