Detailed Instructions; Login To The Switch; Creating Lags - Lightware UBEX Installation And Network Setup Manual


  
5. Configuration Steps - Ubiquiti EdgeSwitch 16 XG
5.4. Detailed Instructions
5.4.1. Login to the Switch
Open a web browser (e.g. Google Chrome) and enter the IP address of the switch. The login screen appears.
Enter the following parameters:
▪ Username: ubnt
▪ Password: ubnt
Login screen of the switch
Installation and Network Setup Guide for UBEX
5.4.2. Creating LAGs
DEFINITION: The Link Aggregation Protocol (LAG) applies to various methods of combining (aggregating)
multiple network connections in parallel in order to increase throughput beyond what a single connection
could sustain.
The UBEX endpoint devices use 2x SFP+ ports in the switch per unit. You need to create LAGs for each port
pair.
Navigate to the Basic -> Port Channel (LAG) submenu. All ports and the current LAG states are listed here.
LAG Configuration page with no configured LAGs
14