Advertisement
FW-7551SE User Manual
Select the Exit tab from the setup screen to enter the Exit BIOS Setup screen. You can display an Exit BIOS
Setup option by highlighting it using the <Arrow> keys. The following table lists the options in this
menu.
Item
Saving Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Changes
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
Launch EFI Shell from file
system device
Select this option to save changes and exit the BIOS menu. It will
automatically reset if the changes made require rebooting the system
to take effect.
Select this option to discard changes and exit and BIOS menu to
continue the booting process.
When you have completed the system configuration changes, select
this option to leave setup and reboot the computer so the new system
configuration parameters can take effect.
This option allows you to discard the selections you made and restore
the previously saved values. After selecting this option, a confirmation
appears. Select Yes to discard any changes and load the previously
saved values.
Save your changes
Discard changes
Restore to factory defaults
Save all of your changes as a user default setting.
Loads your saved user default setting.
This section of the Boot Menu allows booting from a specific device
immediately. Therefore you should see an entry for all bootable
devices.
This option allows you to attempt to launch the EFI Shell application
(shellx64. efi) from one of the available file system devices.
52
Description
Advertisement
