Advertisement
Chapter 3: Hardware Setup
The installation of these two modules should be prior to the hard disk installation.
1. Locate the M.2 slot for LTE module or storage module on the motherboard.
2. Align the notch of the module with the socket key in the slot. Insert the module at 30 degrees into the
socket until it is fully seated in the connector.
3. Push down on the module and secure
it with the screw that comes with the
package.
4. (For LTE module) Snap one LTE
antenna cable onto the U.FL connector
for Main, and the other one onto the
U.FL connector for AUX.
Note: Please purchase the antenna accessory kit for this system from Lanner.
NGFF1_LTE
NGFF2_STORAGE
27
Main
Aux
Advertisement
