Advertisement
FW-7551SE User Manual
To reduce the risk of personal injury, electric shock, or damage to the system, please remove all power
connections to completely shut down the device. Also, please wear ESD protection gloves when conducting
the steps narrated in this chapter.
To access some components and perform certain service procedures, you must perform the following
procedures first.
WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment,
remove the power cord to remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the power supply and some
internal circuitry remain active until AC power is removed.
1. Unpower the system and remove the power cord.
2. Unscrew 2 screws on each side and the bottom of the top cover.
24
Advertisement
