Advertisement
FW-7551SE User Manual
This menu shows the hardware monitor configuration settings. Select an item then press <Enter> to
display the configuration options.
Item
SYS/CPU/AUX
Temperature
CPUFAN0 Speed (CPU
FAN)
CPU Voltage, 1V
voltage, 5V voltage,
VCORE, etc
It allows you to configure the smart fan feature. You can manually turn on the CPU fan or set the
target CPU temperature at which the CPU fan will start running if the fan is not yet turned on. And the CPU
fan can also be turned off automatically if the temperature for the CPU is at or below the specified value.
Refer to Motherboard Layout on Chapter 3 Block Diagram for CPU fan connectors.
Item
Manual Mode
Smart Fan Control:
The onboard hardware monitor automatically detects and displays the CPU
and motherboard temperatures.
The onboard hardware monitor automatically detects and displays the CPU
fan speeds in rotations per minute (RPM). If the fan is not connected to the
motherboard, it displays N/A.
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
Manually set the fan speed from 0 (lowest) speed to 255 (highest speed)
It presets the target system temperature (degree Celcius) at which the
system fan will start running if the fan is not yet turned on with this
mode. And the system fan can also be turned off automatically if the
temperature for the system is at or below the specified value. This feature
specifies t h e temperature with the corresponding fan speed but it may
vary depending on model specifications.
40
Description
Description
Advertisement
