Advertisement
Chapter 3: Hardware Setup
The motherboard provides one mini-PCIe slot supporting both WIFI and LTE module. The installation of this
module should be prior to the hard disk installation.
1. Locate MPCIE1 slot.
2. Align the notch of the module with the socket key in the slot. Insert the module at 30 degrees into the
socket until it is fully seated in the connector.
Notch
3. Fix the module to the motherboard with screws.
4. Snap one LTE antenna cable onto the U.FL connector for MAIN, and the other one onto the U.FL
connector for AUX.
Note: Please purchase the antenna accessory kit for this system from Lanner.
MPCIE1
AUX
MAIN
29
Advertisement
