Scan Setting; Audio Settings; Storing Preset Stations - TechniSat DIGITRADIO 20 Instruction Manual

3. To manually scan the FM frequency, while FM frequency shows up, turn SCROLL/SELECT knob clockwise
or anti-clockwise to change the frequency by 0.05MHz per step.
4. To automatically scan, while FM frequency shows up, turn SCROLL/SELECT knob clockwise or
anticlockwise and then SCROLL/SELECT knob, your radio will skip forwards or backwards until it reached
the next available station.

5.1 Scan setting

By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio (hiss) from weak
stations.
1. To change the scan settings to stop only at stations with good signal strength, press MENU button, and
then turn SCROLL/SELECT knob to select ‚Scan setting', press SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select ‚Strong stations only', and then press SCROLL/SELECT knob to
confirm.

5.2 Audio Settings

By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-to-noise
ratio (hiss).
1. To play weak stations in mono, press MENU button, and then turn SCROLL/SELECT knob to select 'Audio
setting', press SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select ‚Forced mono', and then press SCROLL/SELECT knob to confirm.

5.3 Storing Preset Stations

Your radio can store up to 10 of your favourite FM stations. This will enable you to access your favourite stations
quickly and easily.
1. While your favorite station is playing, press and hold 4+ button until display show 'Preset Store <#:
(Empty)>'.
2. Turn SCROLL/SELECT knob to select among preset numbers 1-10, and then press SCROLL/SELECT knob to
confirm. The display will show 'Preset # stored'.
16