Dab Mode; Selecting Another Station; Secondary Service - TechniSat DIGITRADIO 20 Instruction Manual

4 DAB Mode

When you turn on the radio it will automatically search and store all the available stations. You should conduct
an additional Full Scan to ensure all stations are picked up and stored. It is also recommended every few months
to run a new scan to pick up any new DAB/DAB+ that may have begun broadcasting after purchasing your DAB
radio.
1. For initial use, radio will carry out a full scan and store stations list in memory.
2. Once the scanning is completed, the DAB/DAB+ stations will be displayed in alphanumeric order. The first
station in the list will be selected to broadcast.
Note: if no DAB/DAB+ signal is found in your area, it may be necessary to relocate your radio to a
stronger signal area.

4.1 Selecting another Station

While a program is playing, turn SCROLL/SELECT knob to show station list and select the station you want to
play, and then press SCROLL/SELECT knob to confirm.

4.2 Secondary Service

You may see a ">>" symbol after the name of the station, this indicates that there are secondary services
available to that station. These secondary services contain extra services that are related to the primary station.
E.g. a sports station may want to add extra commentaries. The secondary services are inserted directly after the
primary station (a "<<" symbol is before the name of the station) in the station list.
To select the secondary station, turn SCROLL/SELECT knob until you find the secondary service you want, and
then press SCROLL/SELECT knob to select it.
When the secondary service ends, the unit will automatically switch back to the primary station.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
13