Equipment List - Cessna Hawk XP R172K Pilot Operating Handbook

I
SECTION 6
WEIGHT
&
BALANCE/
EQUIPMENT LIST
CESSNA
MODEL R172K
(SGNIlOd) .LmmrM. .L.il:VH::>HIV
•
6-12
CESSNA
MODEL R172K
i
SECTION 6
WEIGH~ & BALANCE!
EQ~ II MENT LIST
EQUIPMENT LIST
The following equipment list is a comprehensive list of all Cessna equipment available
for this airplane. A separate equipment list of items installed in your specific airplane
is provided in your aircraft file. The following list and the specific list for your airplane
have a similar order of listing.
This equipment list provides the following information:
An item number gives the identification number for the item. Each number is
prefixed with a letter which identifies the descriptive grouping {example:
A. Powerplant & Accessories} under which it is listed. Suffix letters identify
the equipment as a required item, a standard item or an optional item. Suffix
letters are as follows:
-R = required items of equipment for FAA certification
-S = standard equ ipment items
-0 = optional equipment items replacing required or standard items
-A = optional equipment items which are in addition to required or
standard items
A reference drawing column provides the drawing number for the item.
NOTE
If additional equipment is to be installed, it must be done in accord-
ance with the reference drawing, accessory kit instructions, or a
separate FAA approval.
Columns showing weight (in pounds) and arm {in inches} provide the weight
and center of gravity location for the equ ipment.
NOTE
Unless otherwise indicated, true values (not net change values) for the
weight and arm are shown. Positive arms are distances aft of the
airplane datum; negative arms are distances forward of the datum.
NOTE
Asterisks
(*)
after the item weight and arm indicate complete assem-
bly installations. Some major components of the assembly are listed
on the lines immediately following. The summation of these major
components does not necessarily equal the complete assembly instal-
lation .
II:
"
II
Ii
6-13