Table of Contents
Advertisement
Install the mount onto a strong structure.
Prepare the Junction box base and the accessaries for installation.
1. Locate the mounting template at the installation position and drill the ceiling
or wall if needed.
2. Route the Power/Video cables through the grommets from the wall. Insert
the grommets onto the Junction box base.
3. Place the Junction box base on pre-drilled position and x it through using
mounting screws (4x30mm).
4. Connect the cable wiring with wiring connector.
5. Fix the cable xation plate and tie up cable to it.
8
3
4
2
1
Advertisement
Table of Contents
