Table of Contents
Advertisement
3-1-1. WDR MODE
• DOL (Digital OverLap): It is compensated video image by 3 layer data of low,
middle and high shutter.
• FRAME : It is conventional WDR mode.
3-1-2. ROI MODE (Region Of Interest) : Sets speci c area of WDR by window setting.
Select window zone number from 0 to 3 and window use set to on. Then the
window zone can be modi ed position and size.
• WINDOW ZONE : Set the detection zone number from 0 to 3.
• WINDOW USE : Sets ON/OFF motion detection area which you selected.
If set to ON, It can be adjusted position and size.
• H/V-POS : Adjusts the ROI area H, V position which you selected zone.
• H/V-SIZE : Adjusts the area size using H, V direction which you selected zone.
3-1-3. WEIGHT : LOW, MIDDLE, HIGH
Selects the WDR value that you set the WDR mode.
3-2. NORMAL
Optimized for the normal indoor and outdoor in the good lighting condition.
3-3. HLC (High Light Compensation)
Cuts out the highlight area with mask and excludes it from compensation.
3-3-1. LEVEL (0~20): Sets the HLC level.
It determines the video level that
starts cutting out. Lower setting
starts the cut out at lower level.
The cut out area is masked with
selected color.
3-3-2. COLOR :
Select mask color from 8 colors.
Black, White, Yellow, Cyan, Green,
Magenta, Red, or Blue.
3-4. BLC (Backlight Compensation)
This function is used to brighten an image in the foreground with a highly light area
behind it such as sunlight, limiting the a ect of silhouette.
BLC has a target window for compensation and its size and position can be set by
H-POS, V-POS, H-SIZE and V-SIZE.
3-4-1. H/V-POS : Sets the position of BLC area to move vertically and horizontally.
3-4-2. H/V-SIZE : Sets the size of BLC area to move vertically and horizontally.
20
3. SCENE ENHANCE
LEVEL
10
llllllllllllllllllllll
COLOR
BLK
RETURN
Advertisement
Table of Contents
