Table of Contents
Advertisement
1-1-6. RATIO DISP : ON enables to display the zoom ratio on the bottom right corner.
OZx.x appears during the optical zoom and DZx.x will display by multiplying
the optical zoom ratio and the actual digital zoom ratio.
1-2. FOCUS
FOCUS
FOCUS MODE
ZOOM PUSH
LENS INIT
ON
RETURN
1-2-1. FOCUS MODE :
Selects FOCUS MODE to ZOOM PUSH, AUTO or MANUAL. If you set to AUTO
or MANUAL mode, Smart Motion Zoom function in ZOOM is disabled.
• ZOOM PUSH : Focusing is activated only when zoom in/out is working.
Focusing works steadily for sharp focusing on the object.
• AUTO : Focusing is always working.
• MANUAL: Focusing can only be adjusted by ▲,▼ of OSD control joystick or
the remote control via UTC.
i
Smart Zoom is not supported when FOCUS mode Manual/Auto is used.
1-2-2. LENS INIT :
Lens initialization is necessary during the installation or the regular operation
to align the position data with the mechanical positions whose lens elements
may move and deviate from its calibrated position by the shock or vibration,
for example, during the transportation. Lens initialization is automatically
executed at power up.
INITIAL starts the lens initialization when pressing the joystick straight down
for about 2 sec. It is strongly necessary to execute LENS INIT in cases below;
- At the nal step for the installation.
- When focus becomes out of control by the shock or vibration.
FOCUS
FOCUS MODE
LENS INIT
RETURN
Smart Zoom is not supported
when FOCUS mode Manual/AUTO is used
MANUAL
ON
17
EN
Advertisement
Table of Contents
