Table of Contents
Advertisement
9. Set the camera's orientation and tighten the Lock/Unlock screws using hex wrench.
10. If necessary, open the opening cover and connect the video sub-out cable for OSD
menu setting.
11. After all the setting, close the Opening cover and tighten it.
12. Put the sunshield to the camera unit and tighten the sunshield bolts.
Pan & Tilt adjustments
• Unlock the screw on the camera bracket through using the torque wrench supplied
• Set the camera's viewing angle then lock the screw on the bracket.
Adjustment of viewing angle with a bracket
1. Pan limit: Pan is limited to +/- 90°.
2. Tilt limit : Tilt is limited to 0°(2°) min ~
90° max. for wall(ceiling) installation
respectively with reference to the wall
(ceiling) when the inclination of camera
module is 0°, that is, the image is aligned horizontally.
90°
on the wall
3. Inclination limit
(Horizontal image alignment):
Inclination limited to +/-90° max.
10
80°
88°
on the ceiling
±90°
80°
160°
Advertisement
Table of Contents
