Power Supply connections
Camera can work with either AC24V or DC12V, dual voltage power.
Primary and secondary grounds are completely isolated to avoid the possible
ground-loop problems
Operating instructions
Using OSD controller
Setup menu can be accessed and controlled by OSD control joy stick on the side of
camera unit. Five commands are available with the joy stick.
Video Sub-out
Connector
HD-SDI or EX-SDI is selectable by Video format switch only.
i
TVI mode or AHD mode is selectable in the menu only.
(SYSTEM> ANALOG MODE)
12
HD ANALOG
EX/HD SDI
AC24V/DC12V (RED)
AC24V/GND (BLK)
N/A (ORG)
N/A (GRY)
OSD Control
Joy Stick
Video format
Switch