Tools - ABB REG615 Product Manual

Generator and Interconnection Protection
REG615
Product version: 5.0 FP1

25. Tools

The protection relay is delivered as a preconfigured unit. The
default parameter setting values can be changed from the front-
panel user interface (local HMI), the Web browser-based user
interface (Web HMI) or Protection and Control IED Manager
PCM600 in combination with the relay-specific connectivity
package.
PCM600 offers extensive relay configuration functions. For
example, depending on the protection relay, the relay signals,
application, graphical display and single-line diagram, and IEC
61850 communication, including horizontal GOOSE
communication, can be modified with PCM600.
When the Web HMI is used, the protection relay can be
accessed either locally or remotely using a Web browser
Table 115. Tools
Description
PCM600
Web browser
REG615 Connectivity Package
64
(Internet Explorer). For security reasons, the Web HMI is
disabled by default but it can be enabled via the local HMI. The
Web HMI functionality can be limited to read-only access.
The relay connectivity package is a collection of software and
specific relay information, which enables system products and
tools to connect and interact with the protection relay. The
connectivity packages reduce the risk of errors in system
integration, minimizing device configuration and setup times.
Further, the connectivity packages for protection relays of this
product series include a flexible update tool for adding one
additional local HMI language to the protection relay. The
update tool is activated using PCM600, and it enables multiple
updates of the additional HMI language, thus offering flexible
means for possible future language updates.
Version
2.6 (Rollup 20150626) or later
IE 8.0, IE 9.0, IE 10.0 or IE 11.0
5.1 or later
1MRS758279 B
ABB