Cyber Security - ABB REG615 Product Manual

Generator and Interconnection Protection
REG615
Product version: 5.0 FP1
Table 116. Supported functions
Function
Relay parameter setting
Saving of relay parameter settings in the relay
Signal monitoring
Disturbance recorder handling
Alarm LED viewing
Access control management
Relay signal configuration (Signal Matrix)
Modbus® communication configuration (communication management)
DNP3 communication configuration (communication management)
IEC 60870-5-103 communication configuration (communication
management)
Saving of relay parameter settings in the tool
Disturbance record analysis
XRIO parameter export/import
Graphical display configuration
Application configuration
IEC 61850 communication configuration, GOOSE (communication
configuration)
Phasor diagram viewing
Event viewing
Saving of event data on the user's PC
Online monitoring
● = Supported

26. Cyber security

The relay supports role based user authentication and
authorization. It can store 2048 audit trail events to a non-
volatile memory. The non-volatile memory is based on a
memory type which does not need battery backup or regular
component exchange to maintain the memory storage. FTP
ABB
Web HMI
●
●
●
●
●
●
-
-
-
-
-
-
●
-
-
-
●
●
●
-
and Web HMI use TLS encryption with a minimum of 128 bit key
length protecting the data in transit. In this case the used
communication protocols are FTPS and HTTPS. All rear
communication ports and optional protocol services can be
deactivated according to the required system setup.
1MRS758279 B
PCM600
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
-
●
●
●
65