Setting Up Multiple Controllers - Avid Technology FastServe User Manual

Setting up Multiple Controllers

The communication protocol allows you to connect several Controllers to one Server,
and to set each Controller to handle specific outputs, or to set several Controllers to
control the same output.
All devices must be connected to one network, using a standard 1GigaBit Ethernet
hub.
In order to work with several Controllers, each controller must have a unique
Controller ID (See

To set the output configuration:
1. Set the Control mode
outputs controlled by the Controller).
When 1PGM is selected, tap Select First Output, and set the server output to
assign to the Controller PGM1.
When 2PGM is selected, you can set both server outputs to their required PGM
channels.
NOTE:
Several Controllers can control the same Server output, but any action made by
one Controller overrides any action made by other Controllers.
Replay |
Network on page 53).
(see page 53) to 1PGM or 2PGM as required. (The number of
91