Avid Technology FastServe User Manual page 102

> NEXT
Press SHIFT to access additional options
LOOP
PLAY ALL
SET
MASTER
LOCK
COPY
While a clip is loaded (even after it has been played), you can jump to its In- or
Out-point quickly.

To jump to the In/Out point:
■ Press SHIFT, >IN or SHIFT, >OUT, as required.
OSD Data for a Loaded Clip
When a clip is loaded, if OSD data is set to be displayed, the following data appears in
the OSD.
Output
Channel - asterisks indicate the active channel
Clip and Input
102
Load the next clip.
Set the current clip to play in a loop. See
Set all clips to be played, starting with the first clip. See
Clips on page 104.
Set the default input for displaying the current clip. (Select the input
key, and press SET MASTER.)
Protect the clip from deletion. See
Copy the current clip with a different clip number and/or tag to the
next available slot. (Press ENTER to save the clip or type a three digit
number and press ENTER.)
Current Timestamp
Looping Clips
Protecting a Clip on page 106.
Remaining
Recording Time
Time to End of Clip
on page 105.
Playing All
Control
Clips |