Avid Technology FastServe User Manual page 115


To add clips from a different playlist to the current playlist:
CAUTION:
This operation cannot be performed on an empty playlist. To overcome this
limitation, add a temporary clip first, then combine the playlists. Afterwards,
remove the temporary clip.
1. Open the playlist to which you want to add on to.
2. Press SHIFT, ADD LIST.
All populated playlists are displayed.
3. Use the Jog to select the playlist to add.
4. Press ENTER.
The clips from the selected playlist are appended.
NOTE:
Try this: load your first clip, store it, and then use the next/prev LCD keys to
quickly run through all clips by number. Press STORE for each clip you want to
add to the playlist.
Reorganizing the Playlist
Once all required clips are in the playlist, you can change the order of the clips.
 To reorder clips in the playlist (cut and paste):
1. In the Playlist, select the clip you want to move.
2. Press CUT.
3. Using the Jog, highlight the new position.
4. Press PASTE to paste the last deleted clip.
NOTE:
The last removed clip is stored in memory only until another clip is removed from
the playlist, or you close the playlist screen.
Fast Playlist: Adding Clips by Events
For quick playlist creation you can add all clips with an assigned Event to the current
playlist.
 To add clips:
1. Press MENU to open the list of clips.
2. Using the LCD keys, select an Event whose clips you want in the playlist.
Only clips with the selected Event are displayed.
3. Press SHIFT, STORE.
All clips of the selected Event are added to the current playlist.
Playlists |
115