Important Safety Instructions - Avid Technology FastServe User Manual

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other equipment (including amplifiers) that produce heat.
9. Protect power cords from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the equipment.
10.Only use attachments/accessories specified by the manufacturer.
11.For products that are not rack-mountable: Use only with a cart, stand, tripod,
bracket, or table specified by the manufacturer, or sold with the equipment. When a
cart is used, use caution when moving the cart/equipment combination to avoid
injury from tip-over.
12.Unplug this equipment during lightning storms or when unused for long periods of
time.
13.Refer all servicing to qualified service personnel. Servicing is required when the
equipment has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the equipment, the
equipment has been exposed to rain or moisture, does not operate normally, or has
been dropped.
14.For products that are a Mains powered device: The equipment shall not be exposed
to dripping or splashing and no objects filled with liquids (such as vases) shall be
placed on the equipment.
CAUTION:
To reduce the risk of fire or electric shock, do not expose this equipment to
rain or moisture.Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one wider than
the other.A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
15.For products containing a lithium battery:
CAUTION:
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
16.For products with a power switch: It should remain accessible after installation.
17.The equipment shall be used at a maximum ambient temperature of 40° C.
18.This unit may be provided with a power supply cord set suitable for 120V AC input
only (for U.S.A.and Canada). For other than U.S.A. and Canada, a qualified person
must provide for use with this unit, an appropriate, approved power supply cord set
which is in compliance with the end use country requirements and has a minimum
cross-sectional area of 1.0mm2.
Important Safety Instructions |
193