Networking (Playnet); Introduction; Sending Clips Using Playnet - Avid Technology FastServe User Manual

Networking (PlayNet)

Introduction

PlayNet allows for a direct exchange of clips between servers in one group.
NOTE:
Clips can only be displayed by receiving servers with corresponding Video
Standard and Codec parameters.
To allow network operations between servers, enable the PlayNet mode in the
WebSettings and make sure that all needed servers are on the same group port.
In order to have a Networking environment, all required servers must be connected to
a common switch.

Sending Clips using PlayNet

 To send a clip to multiple servers using PlayNet:
1. Go to the Clips tab, right-click on the chosen clip(s) and select Send to.
Networking (PlayNet) |
161