Changing Clips Within A Playlist - Avid Technology FastServe User Manual

Changing Clips Within a Playlist

 To change a clip's In/Out points within a playlist:
1. Select the required clip in the playlist.
For more information, see
2. Press IN or OUT to mark new points, as required, within the clip limits (not including
the safety zone).
3. If you need to set In- and Out-points from the safety zone, press CLR, IN or CLR,
OUT as required.
The In- or Out-point is cleared, and the first frame in the safety zone becomes the
In-point or the last frame in the safety zone becomes the Out-point.
4. Roll to the required frame, and set the points.
For more information, see
page 101.

To change clip angle within a playlist:
1. Select the required clip in the playlist.
For more information, see
2. Press the required Recording Channel key twice.
The clip angle/channel is changed accordingly in the list.
 To add a clip angle to the playlist:
1. Select the required clip in the playlist.
For more information, see
2. Press the required Recording Channel key (once).
3. Press ADD BEFORE or ADD AFTER.
The clip angle/channel is added to the playlist as specified.

To split a clip into two sequential angles (cut in action):
1. Select the required clip in the playlist.
For more information, see
2. Press the required Recording Channel key (once).
3. Using the Jog dial, roll to the point in the clip when you want to change angles.
4. Press CUT IN ACTION.
The playlist now contains two derived clips, with the total clip duration.
118
To browse the playlist:
Creating a Clip on page 95 and
To browse the playlist:
To browse the playlist:
To browse the playlist:
on page 113.
Loading a Clip
on page 113.
on page 113.
on page 113.
on
Playlists |