Safety Precautions - PureLink PureTools PT-HDBT-200 User Manual

User Manual
PT-HDBT-200

SAFETY PRECAUTIONS

To insure the best from the product, please read all instructions carefully before
using the device. Save this manual for further reference.
 Unpack the equipment carefully and save the original box and packing material
for possible future shipment
 Follow basic safety precautions to reduce the risk of fire, electrical shock and
injury to persons.
 Do not dismantle the housing or modify the module. It may result in electrical
shock or burn.
 Using supplies or parts not meeting the products' specifications may cause
damage, deterioration or malfunction.
 Refer all servicing to qualified service personnel.
 To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water.
 Do not put any heavy items on the extension cable in case of extrusion.
 Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
 Install the device in a place with fine ventilation to avoid damage caused by
overheat.
 Keep the module away from liquids.
 Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module
immediately.
 Do not twist or pull by force ends of the optical cable. It can cause malfunction.
 Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power
to the device before cleaning.
 Unplug the power cord when left unused for a long period of time.
 Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.