Mitsubishi Electric C80 series Maintenance Manual page 2

This manual covers the items required for maintaining the MITSUBISHI CNC C80 Series.
Read this manual thoroughly and understand the product's functions and performance before starting to use.
The unit names, cable names and various specifications are subject to change without notice. Please confirm these before
placing an order.
Be sure to keep this manual always at hand.
CAUTION
For items described as "Restrictions" or "Usable State" in this manual, the instruction manual issued by the
machine tool builder (MTB) takes precedence over this manual.
Items not described in this manual must be interpreted as "not possible".
This manual is written on the assumption that all the applicable functions are included. Some of them, however,
may not be available for your NC system. Refer to the specifications issued by the machine tool builder before
use.
Refer to the manuals issued by the machine manufacturer for each machine tool explanation.
Some screens and functions may differ depending on the NC system (or its version), and some functions may
not be possible. Please confirm the specifications before use.
Do not connect NC system to the Internet-connected network.
To maintain the safety of the NC system against unauthorized access from external devices via the network,
take appropriate measures.
In this manual, the following abbreviations might be used.
MTB: Machine tool builder
Also refer to the manuals on "Manual List" as necessary.
Introduction