Download  Print this page

Replacing The Battery - Mitsubishi Electric C80 series Maintenance Manual

Hide thumbs

Advertisement

C80 Series Maintenance Manual
3 Maintenance of the Drive Unit

3.3.1.3 Replacing the Battery

Replacing parts
<Replacing a battery equipped with the spindle/servo drive unit or the battery unit, MDSBTBOX-LR2060>
When the battery voltage is low (warning 9F), place an order for the same type of a battery as the one currently equipped
with the unit.
Battery type LR20 is commercially available as a size-D alkaline battery. The battery may be purchased and replaced by
the user.
Type
MDS-BAT6V1SET
LR20 (size-D alkaline battery)
Note
(1) Four LR20 size-D alkaline batteries are needed for per battery unit, MDSBTBOX-LR2060.
CAUTION
1. When the battery voltage is low (warning 9F), do not shut OFF the power of the drive unit until replacement of the
battery to protect the data.
2. Replace the MDSBTBOX-LR2060 battery with new batteries (LR20) that is within the recommended service period.
Battery equipped unit
Servo drive unit
Battery unit, MDSBTBOX-LR2060
19
IB-1501454-C

Advertisement

Table of Contents

Troubleshooting

   Also See for Mitsubishi Electric C80 series

   Related Manuals for Mitsubishi Electric C80 series

Comments to this Manuals

Symbols: 0
Latest comments: