C80 Series Maintenance Manual
3 Maintenance of the Drive Unit
<MDS-EJ-SP-160>
(1) Remove the mounting screws.
(2) Disconnect the connection connector
of the fan mounted on the unit side face.
Insert the connector
so that it will reach
the end of the stopper
when installing.
Installation procedure of tube for fan harness
IB-1501454-C
Direction of
the fan wind
Sleeve
Connector
Sleeve
Place the fan harness inside the chassis
using the positioning boss for the chassis.
Fold the harness to put it inside so that it
will not be stuck by the cooling fan.
26
Direction of
the fan wind