Kubota u25 Operator's Manual page 19

(1) Code No. RC418-5725-1 [Both sides]
Do not allow any persons within the
working range.
7. CARE OF DANGER, WARNING AND CAUTION LABELS
1. Keep danger, warning and caution labels, clean and free from obstructing material.
2. Clean danger, warning and caution labels with soap and water, dry with a soft cloth.
3. Replace damaged or missing danger, warning and caution labels with new labels from your KUBOTA dealer.
4. If a component with danger, warning and caution label(s) affixed is replaced with new part, make sure new label(s) is
(are) attached in the same location(s) as the replaced component.
5. Mount new danger, warning and caution labels by applying on a clean dry surface and pressing any bubbles to outside
edge.
(2) Code No. RD118-5737-1
SAFE OPERATION 11
-