Mercury VesselView Link Operation Manual page 61

Section 3 - Autopilot Features and Operation
In the ECO Mode panel, VesselView shows the operator the RPM value and the trim position. If one or both of these operating
parameters is out of optimization, the VesselView will display an orange arrow and/or orange sliders in the RPM and trim tiles.
The direction of the orange arrows indicates where to adjust the RPMs and trim position to achieve fuel economy optimization.
Following the guidance of the VesselView will result in both RPMs and trim position being optimized. When optimized, the
Vessel Control tab will display Eco Optimized in green, the trim slider will turn green, and a green leaf icon with the word
Optimized will appear at the top of the Eco Mode bar.
Page 56
61752
61753
90-8M0109374 JUNE 2016
eng