Table of Contents
Advertisement
To activate any Smart Tow launch profile. Select the Enable option and place the throttle levers in wide‑open forward. Smart
Tow will take care of the rest.
Disabling Smart Tow
To exit out of Smart Tow, Disable must be selected. VesselView will transfer throttle control back to the operator. When Smart
Tow is enabled, moving the throttle lever to any point below the speed target will decrease the speed of the boat, but the top
speed of the boat will not increase beyond the target speed.
Cruise Control Mode
Cruise Control
The cruise feature allows the operator to select a set point and adjust the value so the vessel maintains a specific speed or
engine RPM.
•
Cruise is RPM based, unless the vessel incorporates a Mercury Marine GPS into the control area network.
•
If the vessel has a Mercury Marine GPS, the default setting is vessel speed.
•
The operator can select either RPM set points or speed‑based set points. The type of cruise option can be changed in the
Settings menu.
NOTE: Cruise Control can be disabled by placing the remote control levers in neutral.
90-8M0109374
JUNE 2016
eng
Section 3 - Autopilot Features and Operation
61791
61792
Page 61
Hide quick links:
Advertisement
Table of Contents
