Shallow Water And Low Fuel Alarms - Mercury VesselView Link Operation Manual

Section 5 - Warning Alarms
To acknowledge the fault and return to the main VesselView screen, select the X in the upper right‑hand corner of the Active
alarms window, or select the Close option in the initial pop‑up window.
Any active alarms and warning faults will remain accessible through the Mercury tab on the left‑hand side of the screen.
To clear an active fault have the faulty or failed part inspected, repaired or replaced and start‑up the engines and VesselView
and allow the unit to go through the system start‑up scan. If the vessel passes the start‑up scan the Mercury tab on the
left‑hand side of the screen will display in green. The alarm history can always be viewed by selecting the main menu screen,
then choosing the Alarms option. Here, the fault history can be viewed.

Shallow Water and Low Fuel Alarms

For noncritical faults such as Shallow water and Low Fuel, the six short beeps will sound and a pop‑up will appear on‑screen
with a brief text description of the fault.
Page 98
61548
61546
90-8M0109374 JUNE 2016
eng