Speed - Mercury VesselView Link Operation Manual

When tank calibration is complete, select Save and the unit will return to the navigation screen.

Speed

Speed settings allow the operator to select the type of sensor or sender that the VesselView will receive speed data from.
Speed settings can be configured using this menu.
Speed source has the option of choosing a GPS and the GPS source, the CAN P or the CAN H network. A strategy using a
pitot sensor and/or a paddle wheel can also be selected. Selecting the pitot or paddle wheel options brings up a selection of
sources.
90-8M0109374 JUNE 2016
eng
Section 4 - Setup and Calibrations
61684
61685
Page 77