Table 1-5: Digital Acquisition Specifications (Mso70000 Series) - Tektronix DPO70000 Series Technical Reference

Specifications
Table 1-4: Serial Trigger specifications (optional on < 4 GHz models DPO7000 Series) (cont.)
Characteristic
Serial trigger, serial word
recognizer position accuracy
Clock recovery tracking/acquisition
range, typical
≥ 4 GHz models
< 4 GHz models
Minimum signal amplitude needed
for clock recovery, typical
≥ 4 GHz models
< 4 GHz models
Serial interface triggering
standards supported, < 4 GHz
models
TekLink trigger jitter, typical
≥ 4 GHz B models and
MSO70000 models
TekLink FastAcq acquisition
update rate
≥ 4 GHz B models and
MSO70000 models
Table 1-5: Digital acquisition specifications (MSO70000 Series)
Characteristic
Minimum signal amplitude
Minimum detectable pulse width
(mainframe and logic probe), typical
Number of probe channels
Number of digital acquisition channels
Digital channel resolution
Logic threshold range
with P6780 probe
with P6717 probe
Logic threshold resolution
Logic threshold accuracy (with probe
attached), typical
1–40 MSO70000, DSA/DPO70000/B, DPO7000 Series Specifications and Performance Verification
Description
± 325 ps
± 2% of requested baud
± 5% of requested baud
1 division p-p up to 1.25 GBd
1.5 divisions p-p above 1.25 GBd
1 division p-p up to 1.25 GBd
IIC, CAN, SPI, USB1.0, RS232
RMS jitter between the master and slave instruments:
150,000 waveforms per second
Description
300 mV pk-pk; logic threshold centered in dynamic range of signal;
f ≤1.5 GHz for P6780
f ≤350 MHz for P6717
<400 ps
17
16
1 bit, either a 0 or 1
-2 V to +5 V
-2 V to +4.5 V
-1.5 V to +4.0 V
5 mV
≤3% of threshold setting ±75 mV
<500 ps rms