Brief Procedures; Self Tests - Tektronix DPO70000 Series Technical Reference

Brief Procedures

Brief Procedures

Self Tests

2–4 MSO70000, DSA/DPO70000/B, DPO7000 Series Specifications and Performance Verification
The Self Tests use internal routines to confirm basic functionality and proper
adjustment. No test equipment is required to do these test procedures.
The Functional Tests utilize the probe-compensation output at the front panel as a
test-signal source for further verifying that the instrument functions properly. A
BNC cable and an adaptor or a probe, depending on your instrument model are
required to do these test procedures.
This procedure uses internal routines to verify that the instrument functions and
was adjusted properly. No test equipment or hookups are required.
Equipment required
None
Prerequisites
Power on the instrument and allow a
20 minute warm-up before doing this
procedure.