Atlona AT-HD-SC-500 Quick Start Manual

Atlona AT-HD-SC-500 Quick Start Manual

Dual hdmi and vga switcher w/ scaler and display control
Hide thumbs Also See for AT-HD-SC-500:

Advertisement

Dual HDMI and VGA Switcher
w/ Scaler and Display Control
AT-HD-SC-500 Installation Guide
Please check http://www.atlona.com/product/AT-HD-SC-500
for the most recent firmware update or manual.
The dual HDMI and VGA switcher w/scaler provides a multisystem solution. Use the HD-SC-500
as: a standalone 3 in 1 out switcher for small systems, an analog to digital video converter for
systems with no VGA ports, and a scaler for systems with displays that require specific resolutions.
Supports scaling of video up to 1920x1200/1080p, VGA conversion and audio embedding and
deembedding, the HD-SC-500 has a function in almost any system.
Package Contents
• 1 x AT-HD-SC-500
• 3 x captive screw female connector
(5 pin: audio, 3 pin: RS-232, 2 pin: power)
• 1 x Wall/table mount ears
• 1 x 5V captive screw power supply
(AT-PW5V3.6A-CAPT)
• 1 x Installation Guide
Toll free: 1-877-536-3976
atlona.com
Local: 1-408-962-0515

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AT-HD-SC-500 and is the answer not in the manual?

Questions and answers

Summary of Contents for Atlona AT-HD-SC-500

  • Page 1 Supports scaling of video up to 1920x1200/1080p, VGA conversion and audio embedding and deembedding, the HD-SC-500 has a function in almost any system. Package Contents • 1 x AT-HD-SC-500 • 3 x captive screw female connector (5 pin: audio, 3 pin: RS-232, 2 pin: power) •...
  • Page 2: Panel Description

    Panel Description Front Panel AT-HD-SC-500 INPUT HDMI DISPLAY HDMI IN 1 AUDIO IN VGA IN RS-232 1. INPUT button - Press to switch between HDMI 1, HDMI 2, and VGA inputs 2. DISPLAY button - Press and hold for 5 seconds to bring up the OSD or select items 3.
  • Page 3: Captive Screw

    Use the screws at the upper contact plate and hold contact bar to release the top of the connector to compress the wires in place. wires. the wire against the contact plate. Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
  • Page 4: Analog Audio

    2 - TX - Transmitter cable and will connect as 3 - RX - Receiver (receiver) (transmitter) 5 - GND - Ground (ground) (See picture 4) 9 8 7 6 Pin out color will differ per RS-232 cable. Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
  • Page 5 The Display button will flash. Two button flashes means the unit is in static mode and four button flashes means the unit is DHCP mode. Static IP configuration will be: 192.168.1.254 - 255.255.255.0 Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
  • Page 6: Connection And Installation

    Connection and Installation Video Audio Control Ethernet Laptop Video Video AT-HD-SC-500 INPUT HDMI DISPLAY HDMI IN 1 VGA IN AUDIO IN RS-232 Blu-ray player DC 5V AUDIO OUT HDMI IN 2 HDMI OUT Ethernet Audio Video Router AT-PA100-G2 ZIGBEE 12V DC...
  • Page 7: Troubleshooting

    HD-SC-500 using a USB-to-RS-232 adapter. Once connected to the computer, launch a terminal program, such as Hercules or hTerm, and send a command. If RS-232 is functioning properly, then RS-232 feedback will be displayed. Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...

Table of Contents