Overview; Features - Pro'sKit MT-7071 User Manual

OVERVIEW

MT-7071 display is 128x64 dots graphic LCD, 50x27.5mm dimension, with LED
backlight allows work even in dark places. Users can select display language in
Chinese or English. It employs a cable capacitance method to measure cable
length up to 1200M (4000ft) by locating the open point, accuracy is ±3.0% after
length calibrating. User can select unit of length in meters, feet or yards.
MT-7071 can save 7 calibration parameters and recall the data to apply it at
anytime. It lets you easily locate and verify the cable with the receiver, indicates
by low or high signal on LCD or volume of sound to find the cable quickly.
MT-7071 also provides the wiring troubleshooting for continuity, shorts, opens
and crossover on RJ45 LAN cable Cat 5、5e、6 (UTP/STP)、RJ11/12 Telephone
cable Cat. 3 (2/4/6 pin) and Coaxial cable & normal solid/stranded wire by
alligator clips patch cord together with the remote unit. MT-7071 comes with
complete accessories to satisfy different application requirements, including
RJ45 patch cord、RJ11/12 patch cord、BNC patch cord and Alligator clips patch
cord. Ideal for all installation and maintenance fields of telecommunication,
networking, data communication, Audio/Video, cable TV, etc.

FEATURES

Cable Length Measurement up to 1200M
•
Measuring cable length to opens up to 1200M, Calibration accuracy: ±3.0%.
•
Length measurement in feet, yards or meters.
•
Cable length measurement without remote attached.
Calibration Parameters
•
Can determine actual calibration parameters with known length of cable for
cable length test.
•
Allows setting 1-7 calibration parameters.
Wire Tracing up to 3KM
•
The tone and probe kit lets you easily track wire directly in connection with
live telecommunication equipment and router.
Cable Mapping & Status Indication
•
Display the result of pin to pin cable mapping.
•
Display cable status and troubleshoot wiring for continuity, short, open and
crossover.
Max. Support 8 remote units
•
For cable mapping on RJ45 Lan cable Cat 5、5e、6 (UTP)、RJ11/12
Telephone cable Cat. 3 (2/4/6 pin) & BNC connector coaxial cable.
Non Contact Voltage Detection
•
Tests AC voltage from 90 ~ 1000V, special design to make sure the power is
off before testing for circuit protection.
Energy saving
•
Selectable option automatically powers off after 15/30/60/120 min. of no
operation.
2