Cisco NCS 6000 Series Configuration Manual page 498

Configuring Route Convergence Monitoring and Diagnostics
Command or Action
Step 12 threshold value
Example:
RP/0/RP0/CPU0:router(config-rcmd-proto-prio)#threshold
1000
Step 13 storage-location
Example:
RP/0/RP0/CPU0:router(config-rcmd)#storage-location
RP/0/RP0/CPU0:router(config-rcmd-store)#
Step 14 diagnostics directory-path-name
Example:
RP/0/RP0/CPU0:router(config-rcmd-store)#diagnostics
/disk0:/rcmd
Step 15
diagnostics-size
Example:
RP/0/RP0/CPU0:router(config-rcmd-store)#
diagnostics-size 8
Step 16 reports directory-path-name
Example:
RP/0/RP0/CPU0:router(config-rcmd-store)#reports
/disck0:/rcmd
Step 17 reports-size
Example:
RP/0/RP0/CPU0:router(config-rcmd-store)#reports-size
8
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
476
Purpose
Specifies threshold value for convergence in milliseconds.
Select a threshold value from the range. Range is
0-4294967295 milliseconds
Sets the absolute directory path for storing diagnostic
reports.
Specifies the absolute directory path for storing diagnostic
reports. Set a directory-path-name. Example: /disk0:/rcmd/
or <tftp-location>/rcmd/
Specify a maximum size for the diagnostics directory. Set
the size in %. Range is 5%-80%.
Specifies the absolute directory path for storing reports.
Set a directory-path-name. Example: /disk0:/rcmd/ or
<tftp-location>/rcmd/
Specify a maximum size for the reports directory. Set the
size in %. Range is 5%-80%.
Implementing RCMD