Verification - Cisco NCS 6000 Series Configuration Manual

Verification

Configurations applied on the Border Router
Configure a route policy that matches the community set on the trigger router and configure set next-hop
discard:
route-policy RTBH
if community matches-any (1234:4321) then
else
endif
end-policy
Apply the route policy on the iBGP peers:
router bgp 65001
address-family ipv4 unicast
!
neighbor 192.168.102.2
remote-as 65001
address-family ipv4 unicast
route-policy RTBH in
route-policy bgp_all out
Verification
On the border router, the prefix 10.7.7.7/32 is flagged as Nexthop-discard:
RP/0/RSP0/CPU0:router#show bgp
BGP router identifier 10.210.0.5, local AS number 65001
BGP generic scan interval 60 secs
BGP table state: Active
Table ID: 0xe0000000
BGP main routing table version 12
BGP scan interval 60 secs
Status codes: s suppressed, d damped, h history, * valid, > best
Origin codes: i - IGP, e - EGP, ? - incomplete
Network
N>i10.7.7.7/32
RP/0/RSP0/CPU0:router#show bgp 10.7.7.7/32
BGP routing table entry for 10.7.7.7/32
Versions:
Process
Speaker
Last Modified: Jul
Paths: (1 available, best #1, not advertised to EBGP peer)
Not advertised to any peer
Path #1: Received by speaker 0
Not advertised to any peer
Local
RP/0/RSP0/CPU0:router#show route 10.7.7.7/32
Routing entry for 10.7.7.7/32
Known via "bgp 65001", distance 200, metric 0, type internal
Installed Jul 4 14:37:29.394 for 01:47:02
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
36
set next-hop discard
pass
RD version: 12
i - internal, r RIB-failure, S stale, N Nexthop-discard
Next Hop
192.168.102.2
bRIB/RIB
12
4 14:37:29.048 for 00:20:52
192.168.102.2 (discarded) from 192.168.102.2 (10.210.0.2)
Origin incomplete, metric 0, localpref 100, valid, internal best, group-best
Received Path ID 0, Local Path ID 1, version 12
Community: 1234:4321 no-export
Metric LocPrf Weight Path
0 100
SendTblVer
12
Implementing BGP
0 ?