Prerequisites For Implementing Rip - Cisco NCS 6000 Series Configuration Manual

Implementing RIP
The Routing Information Protocol (RIP) is a classic distance vector Interior Gateway Protocol (IGP) designed
to exchange information within an autonomous system (AS) of a small network.
This module describes the concepts and tasks to implement basic RIP routing. Cisco IOS XR software supports
a standard implementation of RIP Version 2 (RIPv2) that supports backward compatibility with RIP Version
1 (RIPv1) as specified by RFC 2453.
Note
For more information about RIP on the Cisco IOS XR software and complete descriptions of the RIP commands
listed in this module, see the
for other commands that might appear while performing a configuration task, search online in the .
Feature History for Implementing RIP
Release
5.0.0
•
•
•
•
•

Prerequisites for Implementing RIP

You must be in a user group associated with a task group that includes the proper task IDs. The command
reference guides include the task IDs required for each command. If you suspect user group assignment is
preventing you from using a command, contact your AAA administrator for assistance.
Related Documents, on page 379
This feature was introduced.
Prerequisites for Implementing RIP, on page 365
Information About Implementing RIP, on page 366
How to Implement RIP, on page 371
Configuration Examples for Implementing RIP, on page 377
Additional References, on page 379
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
10
C H A P T E R
section of this module. To locate documentation
365