Cisco NCS 6000 Series Configuration Manual page 482

Use Wildcards For Routing Policy Sets
This route policy configuration accepts routes with the prefixes mentioned in the two prefix sets, and
drops all other non-matching routes.
3. Commit your configuration.
RP/0/RP0/CPU0:router(config)# commit
This completes the configuration of routing policy with wildcards for prefix sets. For detailed information on
prefix sets, see
Use Wildcards for AS-Path Sets
Use the following example to configure a routing policy with wildcards for AS-path sets.
1. Configure the required AS-path sets in the global configuration mode.
RP/0/RP0/CPU0:router(config)# as-path-set AS_SET1
RP/0/RP0/CPU0:router(config-as)# ios-regex '_22$',
RP/0/RP0/CPU0:router(config-as)# ios-regex '_25$'
RP/0/RP0/CPU0:router(config-as)# end-set
RP/0/RP0/CPU0:router(config)# as-path-set AS_SET2
RP/0/RP0/CPU0:router(config-as)# ios-regex '_42$',
RP/0/RP0/CPU0:router(config-as)# ios-regex '_47$'
RP/0/RP0/CPU0:router(config-as)# end-set
2. Configure a route policy with wildcards to refer to the AS-path sets.
RP/0/RP0/CPU0:router(config)# route-policy WILDCARD_AS_SET
RP/0/RP0/CPU0:router(config-rpl)# if as-path in as-path-set* then pass else drop endif
RP/0/RP0/CPU0:router(config-rpl)# end-policy
This route policy configuration accepts routes with AS-path attributes as mentioned in the two AS-path
sets, and drops all other non-matching routes.
3. Commit your configuration.
RP/0/RP0/CPU0:router(config)# commit
This completes the configuration of routing policy with wildcards for AS-path sets. For detailed information
on AS-path sets, see
Use Wildcards for Community Sets
Use the following example to configure a routing policy with wildcards for community sets.
1. Configure the required community sets in the global configuration mode.
RP/0/RP0/CPU0:router(config)# community-set CSET1
RP/0/RP0/CPU0:router(config-comm)# 12:24,
RP/0/RP0/CPU0:router(config-comm)# 12:36,
RP/0/RP0/CPU0:router(config-comm)# 12:72
RP/0/RP0/CPU0:router(config-comm)# end-set
RP/0/RP0/CPU0:router(config)# community-set CSET2
RP/0/RP0/CPU0:router(config-comm)# 24:12,
RP/0/RP0/CPU0:router(config-comm)# 24:42,
RP/0/RP0/CPU0:router(config-comm)# 24:64
RP/0/RP0/CPU0:router(config-comm)# end-set
2. Configure a route policy with wildcards to refer to the community sets.
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
460
prefix-set, on page 389.
as-path-set, on page 384.
Implementing Routing Policy