High-Density 10-Pin Cable For The U Interface - Lucent Technologies PortMaster PM-2 Hardware Installation Manual

High-Density 10-Pin Cable for the U Interface

Table B-11 gives pinout information for a 20-foot (6m), high-density 10-pin, unshielded,
24-gauge solid level 1 wiring cable with an RJ-45 connector and 10 loose wires.
Caution – Do not use the 10-pin RJ-45 cable in an 8-pin RJ-45 port. Incorrect cable
!
insertion can damage the PortMaster.
This cable is supplied with the MOD-10I-U expansion board and with models PM-2i-U
and PM-Ei-U. Additional cables can be ordered from Lucent. Specify product code
CBL-HD45. Punchdown blocks are available from electronic supply stores that carry
telephone equipment.
Table B-11
Pin
1
2
3
4
5
6
7
8
9
10
Disregard any solid red or solid blue lines because they are not used.
Cable and Ethernet Specifications
High-Density 10-Pin Cable
Ports
Color S0-9
White-gray 5
White-brown 4
White-green 3
White-orange 2
White-blue 1
Blue-white 1
Orange-white 2
Green-white 3
Brown-white 4
Gray-white 5
High-Density 10-Pin Cable for the U Interface
Ports Ports
S10-19 S20-29
S18-19 S28-29
S16-17 S26-27
S14-15 S24-25
S12-13 S22-23
S10-11 S20-21
S10-11 S20-21
S12-13 S22-23
S14-15 S24-25
S16-17 S26-27
S18-19 S28-29
B-15