Portmaster Software - Lucent Technologies PortMaster PM-2 Hardware Installation Manual

Table 1-4
Model
PM-2ER-10
PM-2ER-20
PM-2ER-20
PM-2ER-20
PM-2Ei-U
PM-2E-10I-ST

PortMaster Software

Every PortMaster product comes with Lucent ComOS operating system software
installed in nonvolatile RAM. This software is periodically updated; new releases are
announced on the PortMaster mailing lists and are available by anonymous FTP from
ftp://ftp.livingston.com.pub/le/. See "Subscribing to PortMaster Mailing Lists" on page
xiv for information on mailing lists.
ComOS version 3.7.2 or later is recommended for all PortMaster models. Table 1-5 lists
the earliest ComOS version that can be used with each PortMaster.
Table 1-5
Product
PM-2
PM-2E
PM-2ER
PM-2R
PM-25
PortMaster Communications Server
PortMaster Communications Server Upgrades (Continued)
Can Be Upgraded to Model
PM-2ER-20
PM-2ER-30
PM-2ER-20 with 5 BRI U ports
PM-2ER-20 with 5 BRI S/T ports
PM-2E-10I-U with 10 or 15 BRI U ports
PM-2E-10I-ST with 10 or 15 BRI S/T ports
PortMaster Software Compatibility
Earliest Compatible ComOS Release
Any ComOS release can be used.
Any ComOS release can be used.
ComOS 3.1
ComOS 3.1
ComOS 3.1.4
PortMaster Software
By Installing
1 MOD-2E-10A
1 MOD-2E-10B
1 MOD-10I-U
(Revision C or later)
1 MOD-10I-ST
1 or 2 MOD-10I-U
1 or 2 MOD-10I-ST
1-5