Symbology Settings; Decode Settings - Honeywell Dolphin CH80 User Manual

Setting
Launch Browser
Scan to Intent
Launch EZ Config

Symbology Settings

Use the Symbology Settings to enable or disable bar code symbologies for the
selected scan setting profile.
•
•
To view a list of default settings for supported symbologies, see

Decode Settings

Adjust the Decode Settings when scanning bar codes that are densely packed or poor
quality.
44
Description
Enable or disable URL bar code handling.
If a bar code starts with http:// or https://, the browser
opens using the bar code data as a URL.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_LAUNCH-BROWSER
Enable or disable special handling of scan-to-intent bar
codes.
Applies to bar codes in one of the following formats:
Where: ACTION and extra-data are any string of
characters.
Launches an application listening for the intent.
Intent action:
"com.honeywell.scantointent.intent.action." + ACTION
Intent extra:
"com.honeywell.scantointent.intent.extra.DATA" contains
the remainder of the bar code data after the first '$'
character.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_SCAN_TO_INTENT
Enable or disable special handling of EZConfig bar codes.
Applies to EZConfig bar codes that are encoded with the
Aztec symbology and contain specific header data.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_LAUNCH_EZ_CONFIG
Tap the check box next to a symbology name to enable (check mark) or disable
(no check mark) decoding for that symbology.
Tap the symbology name to view and modify additional configuration
parameters for the symbology selected.
'//' ACTION
'//' ACTION '$' extra-data
page
Dolphin CN80 Mobile Computer
Default
Enable
Enabled
Enabled
90.